HP VPN Firewall Appliances Network Management Command Reference

611
Default
BSR administrative scoping is disabled. Namely, only one BSR exists in a PIM-SM domain.
Views
Public network PIM view
Default command level
2: System level
Examples
# Enable administrative scoping on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr admin-scope
Related commands
• c-bsr
• c-bsr global
• c-bsr group
c-bsr global
Use c-bsr global to configure a C-BSR for the global-scoped zone.
Use undo c-bsr global to remove the C-BSR configuration for the global-scoped zone.
Syntax
c-bsr global [ hash-length hash-length | priority priority ] *
undo c-bsr global
Default
No C-BSRs are configured for the global-scoped zone.
Views
Public network PIM view
Default command level
2: System level
Parameters
hash-length: Specifies a hash mask length in the global-scoped zone, in the range of 0 to 32. If you do
not specify this argument, the corresponding global setting is used.
priority: Specifies the priority of the C-BSR in the global-scoped zone, in the range of 0 to 255. A larger
value indicates a higher priority. If you do not specify this argument, the corresponding global setting is
used.
Examples
# Configure the device to be a C-BSR with the priority of 1 for the global-scoped zone on the public
network.
<Sysname> system-view
[Sysname] pim