HP VPN Firewall Appliances Network Management Command Reference

617
undo c-rp advertisement-interval
Default
The C-RP-Adv interval is 60 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a C-RP-Adv interval in seconds. The value ranges from 1 to 65535.
Examples
# Set the global C-RP-Adv interval to 30 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30
Related commands
c-rp
c-rp holdtime (PIM view)
Use c-rp holdtime to configure the global C-RP timeout timer, namely, the time that the BSR waits before
it must receive a C-RP-Adv message.
Use undo c-rp holdtime to restore the default.
Syntax
c-rp holdtime interval
undo c-rp holdtime
Default
The C-RP timeout timer is 150 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a C-RP timeout timer in seconds. The value ranges from 1 to 65535.
Usage guidelines
Because a non-BSR router refreshes its C-RP timeout timer through BSR bootstrap messages, to prevent
loss of C-RP information in BSR bootstrap messages, make sure the C-RP timeout timer is not smaller than
the interval at which the BSR sends bootstrap messages. The recommended C-RP timeout setting is 2.5
times the BS period or longer.