HP VPN Firewall Appliances Network Management Command Reference

621
Default command level
1: Monitor level
Parameters
source-address: Specifies a multicast source. If you do not provide this argument, this command displays
information about all unicast routes that PIM uses.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If an (S, G) is marked SPT, this (S, G) entry uses a unicast route.
Examples
# Display the information of all unicast routes that PIM uses on the public network.
<Sysname> display pim claimed-route
VPN-Instance: public net
RPF information about: 172.168.0.0
RPF interface: GigabitEthernet0/1, RPF neighbor: 172.168.0.2
Referenced route/mask: 172.168.0.0/24
Referenced route type: unicast (direct)
RPF-route selecting rule: preference-preferred
The (S,G) or (*,G) list dependent on this route entry
(172.168.0.12, 227.0.0.1)
Table 130 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
RPF information about: 172.168.0.0
Information of the route to the multicast source
172.168.0.0.
RPF interface RPF interface type and number.
RPF neighbor IP address of the RPF neighbor.
Referenced route/mask Address/mask of the referenced route.
Referenced route type
Type of the referenced route:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Direct unicast route.
• unicast—Other unicast route (such as static unicast
route).
• mbgp—MBGP route.
• multicast static—Static multicast route.
RPF-route selecting rule Rule of RPF route selection.