HP VPN Firewall Appliances Network Management Command Reference

622
Field Descri
p
tion
The (S,G) or (*,G) list dependent on this route
entry
(S,G) or (*, G) entry list dependent on this RPF route.
display pim control-message counters
Use display pim control-message counters to display the statistics for PIM control messages.
Syntax
display pim control-message counters [ message-type { probe | register | register-stop } | [ interface
interface-type interface-number | message-type { assert | bsr | crp | graft | graft-ack | hello |
join-prune | state-refresh } ] * ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
probe: Specifies null register messages.
register: Specifies register messages.
register-stop: Specifies register-stop messages.
interface interface-type interface-number: Specifies an interface by its type and number.
assert: Specifies assert messages.
bsr: Specifies bootstrap messages.
crp: Specifies C-RP-Adv messages.
graft: Specifies graft messages.
graft-ack: Specifies graft-ack messages.
hello: Specifies hello messages.
join-prune: Specifies join/prune messages.
state-refresh: Specifies state refresh messages.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics for the PIM control messages on all interfaces on the public network.
<Sysname> display pim control-message counters
VPN-Instance: public net