HP VPN Firewall Appliances Network Management Command Reference

632
UpTime: 02:54:43
Upstream interface: GigabitEthernet0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Join/Prune FSM: [SPT: J] [RPT: NP]
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
DR state: [DR]
Join/Prune FSM: [NI]
Assert FSM: [NI]
FSM information for non-downstream interfaces: None
Table 137 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Total 0 (*, G) entry; 1 (S, G) entry Number of (S,G) and (*, G) entries in the PIM routing table.
(172.168.0.2, 227.0.0.1) An (S, G) entry in the PIM routing table.
RP IP address of the RP.
Protocol PIM mode.
Flag
Flag of the (S, G) or (*, G) entry in the PIM routing table:
• 2MSDP—The entry is contained in the next SA message to notify
an MSDP peer.
• ACT—The entry has been used for routing data.
• DEL—The entry will be removed.
• EXPRUNE—Some outgoing interfaces are pruned by other
multicast routing protocols.
• EXT—The entry contains outgoing interfaces provided by other
multicast routing protocols.
• LOC—The entry is on a router directly connected to the same
subnet with the multicast source.
• MSDP—The entry is learnt from MSDP SA messages.
• NIIF—The entry contains unknown incoming interfaces.
• NONBR—The entry has a PIM neighbor searching failure.
• RPT—The entry is on a RPT branch where (S, G) prunes have been
sent to the RP.
• SPT—The entry is on the SPT.
• SQ—The entry is on the originator side of switch-MDT switchover.
• SWT—The entry is in the process of RPT-to-SPT switchover.
• WC—The entry is a wildcard routing entry.
Uptime Length of time since the (S, G) or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) or (*, G) entry.