HP VPN Firewall Appliances Network Management Command Reference

641
Syntax
pim
undo pim
Views
System view
Default command level
2: System level
Usage guidelines
IP multicast routing must be enabled before this command can take effect.
Examples
# Enable IP multicast routing on the public network and enter public network PIM view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim]
Related commands
multicast routing-enable
pim bsr-boundary
Use pim bsr-boundary to configure a PIM domain border, namely, a bootstrap message boundary.
Use undo pim bsr-boundary to remove the configured PIM domain border.
Syntax
pim bsr-boundary
undo pim bsr-boundary
Default
No PIM domain border is configured.
Views
Interface view
Default command level
2: System level
Examples
# Configure GigabitEthernet 0/1 as a PIM domain border.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim bsr-boundary
Related commands
• c-bsr
• multicast boundary