HP VPN Firewall Appliances Network Management Command Reference

643
Default command level
2: System level
Parameters
priority: Specifies a router priority for DR election, in the range of 0 to 4294967295. A larger value
indicates a higher priority.
Examples
# Set the router priority for DR election to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option dr-priority 3
Related commands
hello-option dr-priority
pim hello-option holdtime
Use pim hello-option holdtime to configure the PIM neighbor timeout timer on the current interface.
Use undo pim hello-option holdtime to restore the default.
Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
Default
The PIM neighbor timeout timer is 105 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A value
of 65535 makes the PIM neighbor always reachable.
Examples
# Set the PIM neighbor timeout timer to 120 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option holdtime 120
Related commands
hello-option holdtime