HP VPN Firewall Appliances Network Management Command Reference

41
• No limit is set on the maximum number of interfaces in an interface range. The more interfaces in
an interface range, the longer the command execution time.
• The maximum number of interface range names is only limited by the system resources. To
guarantee bulk interface configuration performance, configure fewer than 1000 interface range
names.
Examples
# Add GigabitEthernet 0/1 and GigabitEthernet 0/2 to interface range named myEthPort, and enter
the interface range view.
<Sysname> system-view
[Sysname] interface range name myEthPort interface gigabitethernet 0/1 to gigabitethernet
0/2
[Sysname-if-range-myEthPort]
# Enter the view of interface range named myEthPort.
<Sysname> system-view
[Sysname] interface range name myEthPort
[Sysname-if-range-myEthPort]