HP VPN Firewall Appliances Network Management Command Reference

645
Default command level
2: System level
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0//1
[Sysname-GigabitEthernet0/1] pim hello-option neighbor-tracking
Related commands
hello-option neighbor-tracking
pim hello-option override-interval
Use pim hello-option override-interval to configure the prune override interval on the current interface.
Use undo pim hello-option override-interval to restore the default.
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds. The value ranges from 1 to 65535.
Examples
# Set the prune override interval to 2000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim hello-option override-interval 2000
Related commands
• hello-option lan-delay
• hello-option override-interval
• pim hello-option lan-delay
pim holdtime assert
Use pim holdtime assert to configure the assert timeout timer on the current interface.
Use undo pim holdtime assert to restore the default.