HP VPN Firewall Appliances Network Management Command Reference

646
Syntax
pim holdtime assert interval
undo pim holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.
Examples
# Set the assert timeout timer to 100 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim holdtime assert 100
Related commands
• holdtime assert
• holdtime join-prune
• pim holdtime join-prune
pim holdtime join-prune
Use pim holdtime join-prune to configure the join/prune timeout timer on the interface.
Use undo pim holdtime join-prune to restore the default.
Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value ranges from 1 to 65535.
Examples
# Set the join/prune timeout timer to 280 seconds on GigabitEthernet 0/1.