HP VPN Firewall Appliances Network Management Command Reference

648
Syntax
pim require-genid
undo pim require-genid
Default
Hello messages without Generation_ID are accepted.
Views
Interface view
Default command level
2: System level
Examples
# Enable GigabitEthernet 0/1 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim require-genid
pim sm
Use pim sm to enable PIM-SM.
Use undo pim sm to disable PIM-SM.
Syntax
pim sm
undo pim sm
Default
PIM-SM is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IP multicast routing is enabled.
Examples
# Enable IP multicast routing on the public network, and enable PIM-SM on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim sm
Related commands
• multicast routing-enable
• pim dm