HP VPN Firewall Appliances Network Management Command Reference

650
Examples
# Set the graft retry period to 80 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim timer graft-retry 80
pim timer hello
Use pim timer hello to configure the interval at which hello messages are sent on the current interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
Hello messages are sent at the interval of 30 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a hello interval in seconds. The value ranges from 1 to 2147483647.
Examples
# Set the hello interval to 40 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim timer hello 40
Related commands
timer hello
pim timer join-prune
Use pim timer join-prune to configure the interval at which join/prune messages are sent on the current
interface.
Use undo pim timer join-prune to restore the default.
Syntax
pim timer join-prune interval
undo pim timer join-prune
Default
The join/prune interval is 60 seconds.