HP VPN Firewall Appliances Network Management Command Reference

652
Syntax
probe-interval interval
undo probe-interval
Default
The register probe time is 5 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a register probe time in seconds. The value ranges from 1 to 1799.
Examples
# Set the register probe time to 6 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] probe-interval 6
Related commands
register-suppression-timeout
prune delay (PIM view)
Use prune delay to configure the prune delay time, namely, the length of time that the device waits
between receiving a prune message and taking a prune action.
Use undo prune delay to restore the default.
Syntax
prune delay interval
undo prune delay
Default
The prune delay time is not configured.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a prune delay time in seconds, in the range of 1 to 128.
Examples
# Set the prune delay time to 75 seconds on the public network.
<Sysname> system-view
[Sysname] pim