HP VPN Firewall Appliances Network Management Command Reference

653

[Sysname-pim] prune delay 75

Use register-policy to configure an ACL rule to filter register messages.

Use undo register-policy to remove the configured register filtering rule.

Syntax

undo register-policy

Default

No register filtering rule is configured.

Views

Public network PIM view

Default command level

2: System level

Parameters

acl-number: Specifies an advanced ACL, in the range of 3000 to 3999. The RP can accept only register

messages that match the permit statement of the ACL.

Examples

# On the public network, configure the RP to accept only those register messages from multicast sources

on the subnet of 10.10.0.0/16 for multicast groups on the subnet of 225.1.0.0/16.

<Sysname> system-view

[Sysname] acl number 3000

[Sysname-acl-adv-3000] rule permit ip source 10.10.0.0 0.0.255.255 destination 225.1.0.0

0.0.255.255

[Sysname-acl-adv-3000] quit

[Sysname] pim

[Sysname-pim] register-policy 3000

Related commands

Use register-suppression-timeout to configure the register suppression time.

Use undo register-suppression-timeout to restore the default.

Syntax

undo register-suppression-timeout

Default

The register suppression time is 60 seconds.