HP VPN Firewall Appliances Network Management Command Reference

655
reset pim control-message counters
Use reset pim control-message counters to reset PIM control message counters.
Syntax
reset pim control-message counters [ interface interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no interface
is specified, this command clears the statistics for PIM control messages on all interfaces.
Examples
# Reset PIM control message counters on all interfaces on the public network.
<Sysname> reset pim control-message counters
source-lifetime (PIM view)
Use source-lifetime to configure the multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime interval
undo source-lifetime
Default
The lifetime of a multicast source is 210 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a multicast source lifetime in seconds. The value ranges from 1 to 31536000.
Examples
# Set the multicast source lifetime to 200 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] source-lifetime 200