HP VPN Firewall Appliances Network Management Command Reference

662
Related commands
pim timer hello
timer join-prune (PIM view)
Use timer join-prune to configure the join/prune interval globally.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The join/prune interval is 60 seconds.
Views
Public network PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune interval in seconds. The value ranges from 1 to 2147483647.
Examples
# Set the global join/prune interval to 80 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer join-prune 80
Related commands
pim timer join-prune