HP VPN Firewall Appliances Network Management Command Reference

663
MSDP commands
The term "router" in this document refers to both routers and routing-capable firewalls.
cache-sa-enable
Use cache-sa-enable to enable the SA cache mechanism to cache the (S, G) entries contained in SA
messages.
Use undo cache-sa-enable to disable the SA cache mechanism.
Syntax
cache-sa-enable
undo cache-sa-enable
Default
The SA cache mechanism is enabled. That is, the device caches the (S, G) entries that the received SA
messages contain.
Views
Public network MSDP view
Default command level
2: System level
Examples
# Enable the SA message cache mechanism on the public network, so that the device caches the (S, G)
entries that the received SA messages contain.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] cache-sa-enable
display msdp brief
Use display msdp brief to display brief information about MSDP peers.
Syntax
display msdp brief [ state { connect | down | listen | shutdown | up } ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
state: Specifies a state.