HP VPN Firewall Appliances Network Management Command Reference

665
Field Descri
p
tion
Up/Down time
Length of time since the MSDP peer connection was established or
failed.
AS
Number of the AS where the MSDP peer is located. A question mark
indicates that the system could not obtain the AS number.
SA Count Number of (S, G) entries.
Reset Count MSDP peer connection reset times.
display msdp peer-status
Use display msdp peer-status to display detailed MSDP peer status information.
Syntax
display msdp peer-status [ peer-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
peer-address: Specifies an MSDP peer by its address. If you do not provide this argument, this command
displays the detailed status information of all MSDP peers.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed status information of the MSDP peer with the address of 10.110.11.11 on the public
network.
<Sysname> display msdp peer-status 10.110.11.11
MSDP Peer Information of VPN-Instance: public net
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40