HP VPN Firewall Appliances Network Management Command Reference

672
Use undo msdp to disable MSDP on the public network and remove the configurations in public network
MSDP view to free the resources that MSDP occupies.
Syntax
msdp
undo msdp
Default
MSDP is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
You must enable IP multicast before you use this command.
Examples
# Enable IP multicast routing on the public network, and enable MSDP on the public network to enter
public network MSDP view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] msdp
[Sysname-msdp]
Related commands
multicast routing-enable
originating-rp
Use originating-rp to configure the address of the specified interface as the RP address of SA messages.
Use undo originating-rp to restore the default.
Syntax
originating-rp interface-type interface-number
undo originating-rp
Default
The PIM RP address is used as the RP address of SA messages.
Views
Public network MSDP view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.