HP VPN Firewall Appliances Network Management Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

When the interface type and interface number are specified, the brief IP configuration information for all

Layer 3 interfaces is displayed.

When only the interface type is specified, the brief IP configuration information for all Layer 3 interfaces

of the specified type is displayed.

When both the interface type and interface number are specified, only the brief IP configuration

information for the specified interface is displayed.

Examples

# Display brief IP configuration information for GigabitEthernet interfaces.

<Sysname> display ip interface gigabitethernet brief

*down: administratively down

(s): spoofing (l): loopback

Interface Physical Protocol IP Address Description

GE0/1 up up 192.168.20.231 --

GE0/2 down down -- --

Table 10 Command output

Field Descri

tion

*down: administratively

down

The interface is administratively shut down with the shutdown command.

(s) : spoofing

Spoofing attribute of the interface. It indicates that an interface might have no

link present even when its link layer protocol is displayed up or the link is set up

only on demand.

(l) : loopback Link loopback test supported by PPP.

Interface Interface name.

Physical

Physical state of the interface:

• *down—The interface is administratively down; that is, the interface is shut

down with the shutdown command.

• down—The interface is administratively up but its physical state is down.

• up—Both the administrative and physical states of the interface are up.

Protocol

Link layer protocol state of the interface:

• down—The protocol state of the interface is down.

• up—The protocol state of the interface is up.

• up(s)—The protocol state of the interface is up (spoofing).

• up(l)—The protocol state of the interface is up (loopback).

• down(l)—The protocol state of the interface is down (loopback).

IP Address

IP address of the interface. If no IP address is configured, two hyphens (--) are

displayed.

Description

Interface description information. If no IP address is configured, two hyphens (--)

are displayed..

At most, 27 characters can be displayed. If there are more than 27 characters,

only the first 24 characters and three dots (…) are displayed.