HP VPN Firewall Appliances Network Management Command Reference

703
Field Descri
p
tion
Keepalive timeout, so
connections disconnected
Number of connections dropped because of keepalive response timeout.
Initiated connections Number of initiated connections.
accepted connections Number of accepted connections.
established connections Number of established connections.
Closed connections Number of closed connections.
dropped Number of dropped connections (after SYN is received from the peer).
initiated dropped
Number of initiated but dropped connections (before SYN is received from
the peer).
Packets dropped with MD5
authentication
Number of packets that fail the MD5 authentication and are dropped.
Packets permitted with MD5
authentication
Number of packets that pass the MD5 authentication.
display tcp ipv6 status
Use display tcp ipv6 status to display the IPv6 TCP connection status, including the IPv6 TCP control block
address, local and peer IPv6 addresses, and status of the IPv6 TCP connection.
Syntax
display tcp ipv6 status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
*: TCP6 MD5 Connection
TCP6CB Local Address Foreign Address State
045d8074 ::->21 ::->0 Listening