HP VPN Firewall Appliances Network Management Command Reference

717
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ipv6 nd nud reachable-time 10000
Related commands
display ipv6 interface
ipv6 nd ra halt
Use ipv6 nd ra halt to enable RA message suppression.
Use undo ipv6 nd ra halt to disable RA message suppression.
Syntax
ipv6 nd ra halt
undo ipv6 nd ra halt
Default
RA messages are suppressed.
Views
Interface view
Default command level
2: System level
Examples
# Suppress RA messages on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ipv6 nd ra halt
ipv6 nd ra interval
Use ipv6 nd ra interval to set the maximum and minimum intervals for advertising RA messages. The
device advertises RA messages at intervals of a random value between the maximum interval and the
minimum interval.
Use undo ipv6 nd ra interval to restore the default.
Syntax
ipv6 nd ra interval max-interval-value min-interval-value
undo ipv6 nd ra interval
Default
The maximum interval between RA messages is 600 seconds, and the minimum interval is 200 seconds.
Views
Interface view
Default command level
2: System level