HP VPN Firewall Appliances Network Management Command Reference

748
Usage guidelines
You can configure multiple DNS server addresses by using the dns-server command repeatedly.
You can configure up to eight DNS servers in an address pool.
The precedence of the specified DNS servers depends on the configuration sequence. The formerly
specified DNS server takes precedence over the latter one.
Examples
# Specify the DNS server address to be assigned to the client as 2:2::3.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] dns-server 2:2::3
domain-name
Use domain-name to configure the domain name suffix for the client.
Use undo domain-name to remove the configuration.
Syntax
domain-name domain-name
undo domain-name
Default
No domain name suffix is configured for the client.
Views
DHCPv6 address pool view, DHCPv6 option group view
Default command level
2: System level
Parameters
domain-name: Domain name suffix, a string of 1 to 50 characters.
Usage guidelines
You can configure only one domain name suffix in an address pool.
If you use the domain-name command multiple times, the most recent configuration takes effect.
Examples
# Configure the domain name suffix to be assigned to the client as aaa.com.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] domain-name aaa.com
ds-lite address
Use ds-lite address to specify the address of the AFTR.
Use undo ds-lite address to delete the address of the AFTR.