HP VPN Firewall Appliances Network Management Command Reference

749
Syntax
ds-lite address ipv6-address
undo ds-lite address
Default
The address of the AFTR is not specified.
Views
DHCPv6 address pool view, DHCPv6 option group view
Default command level
2: System level
Parameters
ipv6-address: IPv6 address of the AFTR.
Usage guidelines
When you configure a DS-Lite tunnel, the Customer Premises Equipment (CPE) sends a DHCPv6 request
to obtain the address of the AFTR. Upon receiving the request, the DHCPv6 server sends the address of
the AFTR to the CPE. For more information about the DS-Lite tunnel, see VPN Configuration Guide.
You can specify only one AFTR address for an address pool. The latest setting overrides the previous one.
Examples
# Specify the AFTR address as 2::1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] ds-lite address 2::1
network
Use network to specify an IPv6 subnet in a DHCPv6 address pool for dynamic address assignment.
Use undo network to remove an IPv6 subnet from a DHCPv6 address pool.
Syntax
network { network-address/prefix-length | prefix prefix-number [ sub-prefix/sub-prefix-length ] }
[ preferred-lifetime preferred-lifetime valid-lifetime valid-lifetime ]
undo network
Default
No IPv6 subnet is configured for dynamic address assignment.
Views
DHCPv6 address pool view
Default command level
2: System level