HP VPN Firewall Appliances Network Management Command Reference

751
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] network prefix 3 3ffe:501:ffff:100::/64
Related commands
• display ipv6 dhcp pool
• ipv6 dhcp client pd
• ipv6 prefix
ipv6 dhcp option-group
Use ipv6 dhcp option-group to create a static DHCPv6 option group, and enter its view.
Use undo ipv6 dhcp option-group to delete the specified static DHCPv6 option group.
Syntax
ipv6 dhcp option-group option-group-number
undo ipv6 dhcp option-group option-group-number
Default
No DHCPv6 option group is configured on the device.
Views
System view
Default command level
2: System level
Parameters
option-group-number: Assign an ID to the static option group, in the range of 1 to 100.
Usage guidelines
The DHCPv6 option group ID must be globally unique on the device. Do not assign the ID of a dynamic
DHCPv6 option group to a static option group.
Examples
# Create a static DHCPv6 option group 1, and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp option-group 1
[Sysname-dhcp6-option-group1]
Related commands
• ipv6 address dhcp-alloc
• ipv6 dhcp client pd
ipv6 dhcp pool
Use ipv6 dhcp pool to create a DHCPv6 address pool and enter DHCPv6 address pool view, or enter
DHCPv6 address pool view if the specified address pool already exists.
Use undo ipv6 dhcp pool to remove the address pool.