HP VPN Firewall Appliances Network Management Command Reference

752
Syntax
ipv6 dhcp pool pool-number [ vpn-instance vpn-instance-name ]
undo ipv6 dhcp pool pool-number
Default
No DHCPv6 address pool is configured.
Views
System view
Default command level
2: System level
Parameters
pool-number: Address pool number in the range of 1 to 128.
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command creates an address pool for the public network.
Usage guidelines
When you create a DHCPv6 address pool, specify the VPN to which the address pool belongs. When
you enter the view of an address pool that already exists, it is not necessary to specify the VPN.
Examples
# Create DHCPv6 address pool 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1 vpn-instance 1
[Sysname-dhcp6-pool-1]
ipv6 dhcp prefix-pool
Use ipv6 dhcp prefix-pool to create a prefix pool and specify the prefix and the length of the prefix
assigned.
Use undo ipv6 dhcp prefix-pool to remove the prefix pool.
Syntax
ipv6 dhcp prefix-pool prefix-pool-number prefix { prefix-number | prefix/prefix-len } assign-len
assign-len
undo ipv6 dhcp prefix-pool prefix-pool-number
Default
No prefix pool is configured.
Views
System view
Default command level
2: System level
Parameters
prefix-pool-number: Prefix pool number in the range of 1 to 128.