HP VPN Firewall Appliances Network Management Command Reference

761
sip-server
Use sip-server to configure the IPv6 address or domain name of a SIP server for the client.
Use undo sip-server to remove the configuration.
Syntax
sip-server { address ipv6-address | domain-name domain-name }
undo sip-server { address ipv6-address | domain-name domain-name }
Default
No SIP server address or domain name is specified.
Views
DHCPv6 address pool view, DHCPv6 option group view
Default command level
2: System level
Parameters
address ipv6-address: Specifies the IPv6 address of a SIP server.
domain-name domain-name: Specifies the domain name of a SIP server. The domain name is a string of
1 to 50 characters.
Usage guidelines
You can configure up to eight SIP server addresses and eight SIP server domain names in an address
pool. The priorities of the specified SIP servers depend on the configuration sequence. The formerly
specified SIP server takes precedence over the latter one.
If you repeatedly use the sip-server command, the latest configuration does not overwrite the previous
one.
Examples
# Specify the SIP server address as 2:2::4 for the client.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] sip-server address 2:2::4
# Specify the domain name of the SIP server as bbb.com for the client.
[Sysname-dhcp6-pool-1] sip-server domain-name bbb.com
static-bind address
Use static-bind address to configure a static IPv6 address binding in an address pool.
Use undo static-bind address to remove a static IPv6 address binding.
Syntax
static-bind address ipv6-address/addr-prefix-length duid duid [ iaid iaid ] [ preferred-lifetime
preferred-lifetime valid-lifetime valid-lifetime ]
undo static-bind address ipv6-address/addr-prefix-length