HP VPN Firewall Appliances Network Management Command Reference

53
Tagged Ports: none
Untagged Ports: none
Table 12 Command output
Field Descri
p
tion
VLAN Type VLAN type, static or dynamic.
Route interface Whether the VLAN interface is configured or not.
Description Description of the VLAN.
Name Name configured for the VLAN.
IP Address
Primary IP address of the VLAN interface. This is available only when an IP
address is configured for the VLAN interface. To display secondary IP
addresses, use the display interface vlan-interface command in any view or
the display this command in VLAN interface view.
Subnet Mask
Subnet mask of the primary IP address. This is available only when an IP
address is configured for the VLAN interface.
Tagged Ports Ports through which VLAN packets are sent tagged.
Untagged Ports Ports through which VLAN packets are sent untagged.
Related commands
vlan
interface vlan-interface
Use interface vlan-interface to create a VLAN interface and enter its view or enter the view of an existing
VLAN interface.
Use undo interface vlan-interface to remove the specified VLAN interface.
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
Views
System view
Default command level
2: System level
Parameters
vlan-interface-id: Specifies a VLAN interface number in the range of 1 to 4094.
Usage guidelines
Create the VLAN before you create the VLAN interface.
To configure an IP address for a VLAN interface that will perform IP routing, use the ip address command
in VLAN interface view.
Examples
# Create VLAN-interface 2, and enter its view.