HP VPN Firewall Appliances Network Management Command Reference

769
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics
DHCPv6 client commands
display ipv6 dhcp client
Use display ipv6 dhcp client to display DHCPv6 client information.
Syntax
display ipv6 dhcp client [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the DHCPv6 client information for a specific
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays DHCPv6 client information for all interfaces.
Examples
# Display DHCPv6 client information for GigabitEthernet 0/1.
<Sysname> display ipv6 dhcp client interface gigabitethernet 0/1
GigabitEthernet0/1:
Type: Stateful client requested for address
State: OPEN
IAID: 0x4030000
Preferred server:
Reachable via address: FE80::223:89FF:FE63:C4BC
DUID: 0003000100238963c4ba
Address: 12:34:56::2/128
Preferred lifetime 86400 sec, valid lifetime 259200 sec
T1 43200 sec, T2 69120 sec
Will expire at Apr 4 2012 15:37:20