HP VPN Firewall Appliances Network Management Command Reference

782
RIPng commands
The term "router" in this document refers to both routers and routing-capable firewalls and firewall
modules.
checkzero
Use checkzero to enable the zero field check on RIPng packets.
Use undo checkzero to disable the zero field check.
Syntax
checkzero
undo checkzero
Default
The zero field check is enabled.
Views
RIPng view
Default command level
2: System level
Usage guidelines
Some fields in RIPng packet headers must be zero. These fields are called "zero fields." You can enable
the zero field check on RIPng packet headers. If any such field contains a non-zero value, the RIPng
packet is discarded.
Examples
# Disable the zero field check on RIPng packet headers of RIPng 100.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] undo checkzero
default cost (RIPng view)
Use default cost to specify the default metric of redistributed routes.
Use undo default cost to restore the default.
Syntax
default cost cost
undo default cost
Default
The default metric of redistributed routes is 0.