HP VPN Firewall Appliances Network Management Command Reference

784
Usage guidelines
If no process-id is specified, information about all RIPng processes is displayed. If a VPN is specified,
information about all the RIPng processes of the VPN is displayed.
Examples
# Display the running status and configuration information of all configured RIPng processes.
<Sysname> display ripng
Public VPN-instance name :
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 8
Update time : 30 sec(s) Timeout time : 180 sec(s)
Suppress time : 120 sec(s) Garbage-Collect time : 120 sec(s)
Number of periodic updates sent : 0
Number of trigger updates sent : 0
IPsec policy name: policy001, SPI: 300
Table 171 Command output
Field Descri
p
tion
Public VPN-instance name Public VPN instance name.
RIPng process RIPng process ID.
Preference RIPng preference.
Checkzero
Indicates whether zero field check for RIPng packet
headers is enabled.
Default Cost Default metric of redistributed routes.
Maximum number of balanced paths Maximum number of load balanced routes.
Update time RIPng update interval, in seconds.
Timeout time RIPng timeout interval, in seconds.
Suppress time RIPng suppress interval, in seconds.
Garbage-Collect time RIPng garbage collection interval, in seconds.
Number of periodic updates sent Number of periodic updates sent.
Number of trigger updates sent Number of triggered updates sent.
IPsec policy name IPsec policy applied in the process.
SPI SPI defined in the IPsec policy.
display ripng database
Use display ripng database to display all active routes in the advertising database of the specified RIPng
process, which are sent in normal RIPng update messages.
Syntax
display ripng process-id database [ | { begin | exclude | include } regular-expression ]