HP VPN Firewall Appliances Network Management Command Reference

787
Table 173 Command output
Field Descri
p
tion
Interface-name Name of an interface running RIPng.
Link Local Address Link-local address of an interface running RIPng.
Split-horizon
Indicates whether the split horizon function is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether the poison reverse function is enabled:
• on—Enabled.
• off—Disabled.
MetricIn/MetricOut Additional metric to incoming and outgoing routes.
Default route
• Only/Originate—Only means that the interface advertises only the
default route. Originate means that the default route and other RIPng
routes are advertised.
• Off—Indicates that no default route is advertised or the
garbage-collect time expires after the default route advertisement was
disabled.
• In garbage-collect status—With default route advertisement
disabled, the interface advertises the default route with metric 16
during the garbage-collect time.
Summary address Summarized IPv6 prefix and summary IPv6 prefix on the interface.
IPsec policy name IPsec policy applied on the interface.
SPI SPI defined in the IPsec policy.
display ripng route
Use display ripng route to display all RIPng routes and timers associated with each route of a RIPng
process.
Syntax
display ripng process-id route [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.