HP VPN Firewall Appliances Network Management Command Reference

794
Syntax
preference [ route-policy route-policy-name ] preference
undo preference [ route-policy ]
Default
The preference of RIPng routes is 100.
Views
RIPng view
Default command level
2: System level
Parameters
route-policy-name: Routing policy name with 1 to 63 case-sensitive characters.
value: Preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy by using the keyword route-policy to set a preference for the matching
RIPng routes.
• The preference set by the routing policy applies to all matching RIPng routes. The preference of
other routes is set by the preference command.
• If no preference is set by the routing policy, the preference of all RIPng routes is set by the preference
command.
Examples
# Set the RIPng route preference to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
# Restore the default RIPng route preference.
[Sysname-ripng-100] undo preference
reset ripng process
Use reset ripng process to reset the specified RIPng process.
Syntax
reset ripng process-id process
Views
User view
Default command level
2: System level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.