HP VPN Firewall Appliances Network Management Command Reference

806
Views
OSPFv3 area view
Default command level
2: System level
Parameters
value: Specifies a cost for the default route advertised to the stub area, in the range of 0 to 65535. The
default is 1.
Usage guidelines
Use of this command is only available on the ABR that is connected to a stub area.
You have two commands to configure a stub area: stub, defaulted-cost. Use the stub command on
routers connected to a stub area to configure the area as stub.
If multiple OSPFv3 processes are running, use of this command takes effect only for the current process.
Examples
# Configure Area 1 as a stub area, and specify the cost of the default route advertised to the stub area
as 60.
<Sysname> system-view
[Sysname] ospfv3
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] stub
[Sysname-ospfv3-1-area-0.0.0.1] default-cost 60
Related commands
stub
default-route-advertise
Use default-route-advertise to generate a default route into the OSPFv3 routing domain.
Use undo default-route-advertise to disable OSPFv3 from redistributing a default route.
Syntax
default-route-advertise [ always | cost value | route-policy route-policy-name | type type ] *
undo default-route-advertise
Default
No default route is redistributed.
Views
OSPFv3 view
Default command level
2: System level
Parameters
always: Generates a default route in an ASE LSA into the OSPFv3 routing domain regardless of whether
the default route exists in the routing table. Without this keyword, the command can distribute a default