HP VPN Firewall Appliances Network Management Command Reference

809
Field Descri
p
tion
SPF algorithm executed 1 times SPF algorithm is executed 1 time.
Number of LSA Number of LSAs.
These LSAs' checksum Sum Sum of all LSAs' checksum.
Number of Unknown LSA Number of unknown LSAs.
IPsec policy name IPsec policy used.
SPI SPI defined in the IPsec policy.
display ospfv3 interface
Use display ospfv3 interface to display OSPFv3 interface information.
Syntax
display ospfv3 interface [ interface-type interface-number | statistic ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
statistic: Displays the interface statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display OSPFv3 interface information for GigabitEthernet 0/1.
<Sysname> display ospfv3 interface gigabitethernet 0/1
GigabitEthernet0/1 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link