HP VPN Firewall Appliances Network Management Command Reference

826
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no process is specified, virtual link information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 virtual link information.
<Sysname> display ospfv3 vlink
Virtual Link VLINK1 to router 1.1.1.1 is up
Transit area :0.0.0.1 via interface GigabitEthernet0/1, instance ID: 0
Local address: 2000:1::1
Remote address: 2001:1:1::1
Transmit Delay is 1 sec, State: P-To-P,
Timer intervals configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Adjacency state :Full
IPsec policy name: policy001, SPI: 300
Table 193 Command output
Field Descri
p
tion
Virtual Link VLINK1 to router 1.1.1.1 is up The virtual link VLINK1 to router 1.1.1.1 is up.
Transit area 0.0.0.1 via interface GigabitEthernet0/1 Interface GigabitEthernet 0/1 in transit area 0.0.0.1.
instance ID Instance ID.
Local address Local IPv6 address.
Remote address Remote IPv6 address.
Transmit Delay Transmit delay of sending LSAs.
State Interface state.
Timer intervals configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Timer intervals in seconds:
• Hello—10.
• Dead—40.
• Wait—40.
• Retransmit—5.
Hello due in 00:00:02 Send hello packets in 2 seconds.
Adjacency state Adjacency state.
IPsec policy name IPsec policy used on the virtual link.