HP VPN Firewall Appliances Network Management Command Reference

827
Field Descri
p
tion
SPI SPI defined in the IPsec policy.
enable ipsec-policy (OSPFv3 area view)
Use enable ipsec-policy to apply an IPsec policy in the OSPFv3 area.
Use undo enable ipsec-policy to remove the IPsec policy from the OSPFv3 area.
Syntax
enable ipsec-policy policy-name
undo enable ipsec-policy
Default
No IPsec policy is applied in an area.
Views
OSPFv3 area view
Default command level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Usage guidelines
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to OSPFv3 area 0.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0] enable ipsec-policy policy001
filter-policy export (OSPFv3 view)
Use filter-policy export to filter redistributed routes.
Use undo filter-policy export to remove the configuration.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ bgp4+ | direct | isisv6 process-id |
ospfv3 process-id | ripng process-id | static ]
undo filter-policy export [ bgp4+ | direct | isisv6 process-id | ospfv3 process-id | ripng process-id |
static ]
Default
OSPFv3 does not filter redistributed routes.