HP VPN Firewall Appliances Network Management Command Reference

832
Usage guidelines
With this feature enabled, information about neighbor state changes of the current OSPFv3 process will
display on the configuration terminal.
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
maximum load-balancing (OSPFv3 view)
Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes
for load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
OSPFv3 view
Default command level
2: System level
Parameters
maximum: Specifies the maximum number of ECMP routes, in the range of 1 to 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6
ospfv3
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
Syntax
ospfv3 [ process-id ] [ vpn-instance vpn-instance-name ]
undo ospfv3 [ process-id ]
Default
The system runs no OSPFv3 process.