HP VPN Firewall Appliances Network Management Command Reference

834
Examples
# Enable OSPFv3 process 1 on an interface that belongs to instance 1 and specify area 1 for
GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospfv3 1 area 1 instance 1
ospfv3 bfd enable
Use ospfv3 bfd enable to enable BFD for link failure detection on an OSPFv3 interface.
Use undo ospfv3 bfd enable to disable BFD on the OSPFv3 interface.
Syntax
ospfv3 bfd enable [ instance instance-id ]
undo ospfv3 bfd enable [ instance instance-id ]
Default
The OSPFv3 interface is not enabled with BFD.
Views
Interface view
Default command level
2: System level
Parameters
instance-id: Specifies the instance ID of an interface, in the range of 0 to 255. The default is 0.
Usage guidelines
The following matrix shows the ospfv3 bfd enable command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
Examples
# Enable BFD on GigabitEthernet 1/1 in instance 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/1
[Sysname-GigabitEthernet1/1] ospfv3 bfd enable instance 1