HP VPN Firewall Appliances Network Management Command Reference

841
Examples
# Configure the LSA retransmission interval on GigabitEthernet 0/1 in instance 1 as 12 seconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospfv3 timer retransmit 12 instance 1
ospfv3 timer poll
Use ospfv3 timer poll to set the poll interval on an NBMA interface.
Use undo ospfv3 timer poll to restore the default value.
Syntax
ospfv3 timer poll seconds [ instance instance-id ]
undo ospfv3 timer poll [ seconds ] [ instance instance-id ]
Default
The poll interval is 120 seconds.
Views
Interface view
Default command level
2: System level
Parameters
seconds: Poll interval in seconds, in the range of 1 to 65535.
instance-id: Interface instance ID, in the range of 0 to 255. The default is 0.
Examples
# Set the poll timer interval on GigabitEthernet 0/1 to 130 seconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospfv3 timer poll 130
ospfv3 trans-delay
Use ospfv3 trans-delay to configure the transmission delay for an interface with an instance ID.
Use undo ospfv3 trans-delay to restore the default.
Syntax
ospfv3 trans-delay seconds [ instance instance-id ]
undo ospfv3 trans-delay [ seconds ] [ instance instance-id ]
Default
The transmission delay is 1 second.
Views
Interface view