HP VPN Firewall Appliances Network Management Command Reference

844
Default
An interface is able to receive and send OSPFv3 packets.
Views
OSPFv3 view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
all: Specifies all interfaces.
Usage guidelines
Multiple processes can disable the same interface from receiving and sending OSPFv3 packets, but use
of the silent-interface command takes effect only on interfaces enabled with the current process.
Examples
# Disable GigabitEthernet 0/1 from receiving and sending OSPFv3 packets in OSPFv3 processes 100
and 200.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] router-id 10.110.1.9
[Sysname-ospfv3-100] silent-interface gigabitethernet 0/1
[Sysname-ospfv3-100] quit
[Sysname] ospfv3 200
[Sysname-ospfv3-200] router-id 20.18.0.7
[Sysname-ospfv3-200] silent-interface gigabitethernet 0/1
spf timers
Use spf timers to configure the delay interval and hold interval for OSPFv3 SPF calculation.
Use undo spf timers to restore the default.
Syntax
spf timers delay-interval hold-interval
undo spf timers
Default
The delay interval and hold interval default to 5 seconds and 10 seconds.
Views
OSPFv3 view
Default command level
2: System level
Parameters
delay-interval: Interval in seconds between when OSPFv3 receives a topology change and when it starts
SPF calculation, in the range of 0 to 65535.