HP VPN Firewall Appliances Network Management Command Reference

847
IPv6 IS-IS commands
The term "router" in this document refers to both routers and routing-capable firewalls and firewall
modules.
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information. This
document describes only IPv6 IS-IS exclusive commands.
The following matrix shows the feature and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
display isis route ipv6
Use display isis route ipv6 to display IPv6 IS-IS routing information.
Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id | vpn-instance vpn-instance-name ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: Specifies an IS-IS process by its ID, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. Support for this option depends on the device model.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.