HP VPN Firewall Appliances Network Management Command Reference

850
Table 195 Command output
Field Descri
p
tion
IPV6 Dest IPv6 destination address and prefix.
Cost Route cost.
Flag/Flags
Routing information status flags:
• D—This is a direct route.
• R—The route has been added into the routing table.
• L—The route has been advertised in an LSP.
• U—Route leaking flag, indicating the Level-1 route is from Level-2. U means the route
will not be returned to Level-2.
Admin Tag Administrative tag.
Src Count Number of advertisement sources.
Next Hop Next hop.
Interface Outbound interface.
ExitIndex Outbound interface index.
ipv6 default-route-advertise
Use ipv6 default-route-advertise to generate a Level-1 or Level-2 IPv6 IS-IS default route.
Use undo ipv6 default-route-advertise to disable generating a default route.
Syntax
ipv6 default-route-advertise [ [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name ] *
undo ipv6 default-route-advertise [ route-policy route-policy-name ]
Default
No IPv6 IS-IS default route is generated.
Views
IS-IS view
Default command level
2: System level
Parameters
level-1: Generates a default route for Level-1.
level-1-2: Generates a default route for Level-1-2.
level-2: Generates a default route for Level-2.
route-policy-name: Specifies the name of a routing policy with a case-sensitive string of 1 to 63
characters.
Usage guidelines
With a routing policy, you can configure IPv6 IS-IS to generate the default route that must match the
routing policy. You can use the apply isis level-1 command in routing policy view to generate a default
route in L1 LSPs, or use the apply isis level-2 command in routing policy view to generate a default route