HP VPN Firewall Appliances Network Management Command Reference

851
in L2 LSPs, and use the apply isis level-1-2 in routing policy view to generate a default route in L1 and L2
LSPs.
If no level is specified, this command generates a default route for Level-2.
Examples
# Configure the router to generate a default route in a Level-2 LSP.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 default-route-advertise
Related commands
apply isis
ipv6 enable
Use ipv6 enable to enable IPv6 for an IS-IS process.
Use undo ipv6 enable to disable IPv6.
Syntax
ipv6 enable
undo ipv6 enable
Default
IPv6 is disabled for an IS-IS process.
Views
IS-IS view
Default command level
2: System level
Examples
# Create IS-IS process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
ipv6 filter-policy export
Use ipv6 filter-policy export to configure IPv6 IS-IS to filter redistributed routes before advertisement.
Use undo ipv6 filter-policy export to disable the filtering.
Syntax
ipv6 filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]