HP VPN Firewall Appliances Network Management Command Reference

854
The source keyword specifies the destination address of a route, and the destination keyword specifies
the prefix of the route. (The prefix must be valid; otherwise, the configuration is ineffective.)
Examples
# Reference the IPv6 ACL 2003 to filter the received routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 2003 import
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter the
received routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 3000 import
Related commands
ipv6 filter-policy export
ipv6 import-route
Use ipv6 import-route to enable IPv6 IS-IS to redistribute routes from another routing protocol.
Use undo ipv6 import-route to disable route redistribution.
Syntax
ipv6 import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | [ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name | tag tag ] *
undo ipv6 import-route protocol [ process-id ]
Default
Route redistribution is disabled.
Views
IS-IS view
Default command level
2: System level
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be direct, static, ripng, isisv6,
bgp4+, or ospfv3.
process-id: Process ID of the routing protocol of ripng, isisv6, or ospfv3, in the range of 1 to 65535. The
default is 1.
cost: Cost for redistributed routes, in the range of 0 to 4261412864.
level-1: Redistributes routes into the Level-1 routing table.