HP VPN Firewall Appliances Network Management Command Reference

857
Default
The maximum number of ECMP routes is 8.
Views
IS-IS view
Default command level
2: System level
Parameters
number: Maximum number of ECMP routes, in the range of 1 to 8.
Usage guidelines
Configure the maximum number of ECMP routes according to the memory capacity.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] ipv6 maximum load-balancing 2
ipv6 preference
Use ipv6 preference to configure the preference for IPv6 IS-IS.
Use undo ipv6 preference to restore the default.
Syntax
ipv6 preference { preference | route-policy route-policy-name } *
undo ipv6 preference
Default
The default preference for IPv6 IS-IS protocol is 15.
Views
IS-IS view
Default command level
2: System level
Parameters
preference: Preference for IPv6 IS-IS, in the range of 1 to 255.
route-policy-name: Name of a routing policy, a case-sensitive string of 1 to 63 characters.
Usage guidelines
When a router runs multiple dynamic routing protocols, the system assigns a preference to each routing
protocol. If several protocols find routes to the same destination, the route found by the protocol with the
highest preference is selected.
Examples
# Configure the preference of IPv6 IS-IS as 20.
<Sysname> system-view