HP VPN Firewall Appliances Network Management Command Reference

859
Use undo isis ipv6 enable to disable the configuration.
Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
Default
IPv6 is disabled for an IS-IS process.
Views
Interface view
Default command level
2: System level
Parameters
process-id: Specifies an IS-IS process by its ID, in the range of 1 to 65535. The default is 1.
Examples
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process, and enable IPv6 for the
process on GigabitEthernet 1/1.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface GigabitEthernet1/1
[Sysname-GigabitEthernet1/1] ipv6 address 2002::1/64
[Sysname-GigabitEthernet1/1] isis ipv6 enable 1