HP VPN Firewall Appliances Network Management Command Reference

861
Ke
y
words Function
detail-suppressed
This keyword does not suppress the summary route, but it suppresses the
advertisement of all the more specific routes. To summarize only some
specific routes, use the peer filter-policy command.
suppress-policy
Used to create a summary route and suppress the advertisement of some
summarized routes. If you want to suppress some routes selectively and
leave other routes still advertised, use the if-match clause of the route-policy
command.
origin-policy Selects only routes matching the routing policy for route summarization.
attribute-policy
Sets attributes except the AS-PATH attribute for the summary route. The same
work can be done by using the peer route-policy command.
Examples
# In IPv6 address family view, create a summary of 12::/64 in the IPv6 routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] aggregate 12:: 64
balance (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use balance to configure the number of IPv6 BGP ECMP routes.
Use undo balance to restore the default.
Syntax
balance [ ebgp | ibgp ] number
undo balance [ ebgp | ibgp ]
Default
The feature is not available.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level
Parameters
ebgp: Configures load balancing for IPv6 EBGP routes.
ibgp: Configures load balancing for IPv6 IBGP routes.
number: Specifies the number of BGP ECMP routes, in the range of 1 to 8. When it is set to 1, load
balancing is disabled.
The following matrix shows the value range for the number argument on different firewalls and firewall
modules: