HP VPN Firewall Appliances Network Management Command Reference

Use undo port hybrid vlan to remove the hybrid ports from the specified VLANs.

Syntax

port hybrid vlan vlan-list { tagged | untagged }

undo port hybrid vlan vlan-list

Default

A hybrid port only allows packets from VLAN 1 to pass through untagged.

Views

Ethernet interface view, Layer 2 aggregate interface view

Default command level

2: System level

Parameters

vlan-list: Specifies a list of VLANs that the hybrid ports will be assigned to in the format of { vlan-id1 [ to

vlan-id2 ] }&<1-10>, where the value range for vlan-id1 and vlan-id2 is 1 to 4094, vlan-id2 must be no

smaller than vlan-id1, and &<1-10> indicates that you can specify up to 10 vlan-id1 [ to vlan-id2 ]

parameters. Make sure the specified VLANs already exist.

tagged: Configures the ports to send the tagged packets of the specified VLANs.

untagged: Configures the ports to send the untagged packets of the specified VLANs.

Usage guidelines

A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the

VLANs the hybrid port carries are the set of VLANs specified by vlan-list in each execution.

The configuration made in Ethernet interface view applies only to the port.

The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its

aggregation member ports.

• If the system fails to apply the configuration to the aggregate interface, it stops applying the

configuration to aggregation member ports.

• If the system fails to apply the configuration to an aggregation member port, it skips the port and

moves to the next member port.

Examples

# Assign the hybrid port GigabitEthernet 0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100,

and configure GigabitEthernet 0/1 to send packets of these VLANs with tags kept.

<Sysname> system-view

[Sysname] interface gigabitethernet 0/1

[Sysname-GigabitEthernet0/1] port link-type hybrid

[Sysname-GigabitEthernet0/1] port hybrid vlan 2 4 50 to 100 tagged

# Assign the hybrid Layer 2 aggregate interface Bridge-Aggregation 1 and its member ports to VLAN 2,

and configure them to send packets of VLAN 2 with tags removed.

<Sysname> system-view

[Sysname] interface bridge-aggregation 1

[Sysname-Bridge-Aggregation1] port link-type hybrid

[Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged

Please wait... Done.

Configuring GigabitEthernet0/1... Done.