HP VPN Firewall Appliances Network Management Command Reference

868
Default
The redistribution is not enabled.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level
Examples
# Enable the redistribution of default route from OSPFv3 into IPv6 BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] default-route imported
[Sysname-bgp-af-ipv6] import-route ospfv3 1
display bgp ipv6 group
Use display bgp ipv6 group to display IPv6 peer group information.
Syntax
display bgp ipv6 group [ ipv6-group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-name: Peer group name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display the information of the IPv6 peer group aaa.
<Sysname> display bgp ipv6 group aaa
BGP peer-group is aaa
Remote AS 100
Type: internal